Supply Polyethylene-Polypropylene Glycol Poloxamer CAS 9003-11-6 Polyester Polyol

• Customization: Available
• CAS No.: 9003-11-6
• Formula: C5h10o2
• Model NO.: CAS 9003-11-6
• EINECS: 618-355-0
• Molecular Principal Chain: Carbon Chain Polymer
• Color: Colourless Transparent Liquid
• Product Name: CAS 9003-11-6 Polyethylene-Polypropylene Glycol
• Grade Standard: Industrial Grade
• Validity Period: 2 Years
• Type: Pop10%, 13%, 15%, 25%, 45%
• Quality: Top Grade
• Transport Package: Net Weight 200kg Iron Drum
• Specification: 99%
• Trademark: Jinao
• Origin: China
• Production Capacity: 100000 Ton/Tons Per Month
• Package Size: 50.00cm * 25.00cm * 30.00cm
• Package Gross Weight: 50.000kg

Product Description

Peg PPG Poloxamer Polyether Polyol Polyethylene Glycol Polypropylene Glycol CAS 9003-11-6

Ether polyol (referred to as polyether) is composed of initiator (compound containing active hydrogen group) and et hylene oxide (EO), propylene oxide (PO), butylene oxide (BO), etc. in the presence of a catalyst Prepared by polyaddition reaction. The one with the largest polyether yield is glycerol (glycerol) as the initiator and epoxy (generally PO and EO are used together), by changing the feeding method of PO and EO (mixed or separately added), the addition ratio, Various general polyether polyols can be produced under conditions such as the order of addition.

Polyether polyols are chemicals commonly used in the manufacture of general-purpose polyurethane foams, adhesives, and elastomers, among others. Special polyether polyols are also used as defoamers, surfactants, etc.

Item	Unit	First grade	Results	Test Method
Appearance		Uniform viscous liquid without mechanical impurities and suspended solids	Uniform viscous liquid without mechanical impurities and suspended solids	Visual
OH Value	mgKOH/g	33.5~36.5	33.96	GB/T12008.3-2009
Water Content	%	≤0.05	0.045	GB/T22313-2008/ISO14897:2002
Acid Value	mgKOH/g	≤0.05	0.024	GB/T12008.5-2010
pH		5~7	5.94	GB/T12008.2-2010AppendixB
K+	mg/kg	≤3	2	GB/T12008.4-2009
Viscosity	mPa·s/25ºC	750~950	832	GB/T12008.7-2010
Color	Pt-Co	≤50	10	GB/T605-2006

We are top China manufacturer of CAS 9003-11-6 Polyether polyol/Polyethylene Glycol -Polypropylene Glycol.

Polyether polyol/Polyethylene Glycol -Polypropylene Glycol CAS 9003-11-6

1. As an emulsifier and stabilizer: Poloxamer is one of the few synthetic emulsifiers used in intravenous emulsions as a water in oil emulsifier. Dosage: 0.1% to 5%. The emulsion prepared with this product has fewer milk particles, usually within 1 μ Below m, the absorption rate is high. Stable physical properties, able to withstand hot pressure sterilization and low-temperature freezing. Application example: Fat emulsion infusion for injection. The prescription for Lipomul is 150g cottonseed oil, 12g soy phospholipids, 3g Pluronic F68, 40g glucose, and 100ml injection water.
 
2. As a solvent enhancer: This product can increase the surface solubility of various drugs, such as salicylic acid, indomethacin, and metronidazole, by forming micelles with surfactants. Taking salicylic acid as an example, salicylic acid can be solubilized in two Pluronic types, Pluronic L65 and Pluronic F68. Each mole of Pluronic L65 can solubilize 1.3mol of salicylic acid, and each mole of Pluronic F68 can solubilize 0.93mol of salicylic acid, indicating the stable solubility of salicylic acid in different concentrations of Pluronic. The solubility of salicylic acid in Pluronic per minute (mg/ml x 10000). The solubility of salicylic acid in F68 gradually increases with increasing concentration of the active agent, but in L65, the solubility rapidly increases to its maximum with increasing concentration, but gradually decreases thereafter.

3. As an absorption enhancer: On the one hand, this product slows down intestinal peristalsis, prolongs the retention time of the drug in the gastrointestinal tract, and increases absorption, thereby improving the bioavailability of oral formulations. On the other hand, this product has good skin compatibility, increases skin permeability, and can promote the absorption of topical agents.

4. As slow release materials: solid products with large molecular weight are used as adhesives, coating materials, etc. to prepare tablets, capsules, gel, etc. to achieve the purpose of slow release and controlled release, and have achieved satisfactory results. Dosage: 5% to 15%.